輸紙部；

輸紙皮帶采用日本倪塔品牌，解決了UV印刷紙張輸紙不順暢的問題，底部皮帶加真空吸附輸紙，伺服電機驅動，可多種輸紙模式切換。

Paper Feeding:

The Paper Feeding Belt of the machine adopts the Japanese Brand Nita which well solves the problem of unsmooth UV printing paper feeding. The paper feeding is realized through bottom belt with the vacuum absorption function. Driven by Servo Motor enables it to switch among multiple paper feeding modes.

軌道校正部；

軌道帶自鎖直線軸承自由滑動取代了傳統絲桿傳動手搖調節慢的缺點，高分子尼龍材料軌道條 低噪音，耐磨損，校正定位銷采用伺服電機單獨驅動。

Correction of Paper Feeding Track:

The track with self-locking linear bearing is free to slide. It takes the place of traditional slow

screw-driving hand-shaking regulation. The chains orbits which contain high polymer nylon

material are in high wear resistance and low noise .Correction pin adopts servo motor

separately driving.

涂膠部；

涂膠滾筒304不銹鋼制作，易清洗，耐腐蝕，印膠模型滾筒橫向與縱向分別由伺服電機驅動，可不停機直接進行雙向調節,涂膠部具備空張?zhí)鸸δ埽苊饽z水接觸到皮帶，減少因?yàn)榭諒埗l繁停機清洗皮帶的麻煩。

Gluing:

The gluing roller is made from 304 Stainless steel material which is in high corrosion resistance

and is easy to clean. Transverse and longitudinal gluing model roller are driven by servo motor

which can realize the dual-directional regulation directly without stopping. The gluing part is

equipped with the automatic lifting function. It avoids the glue touching the belt which

reduces the trouble of frequently machine stop for cleaning because of the lack for paper

problem.

薄膜沖壓部；

薄膜放卷帶磁粉張力和自動糾偏校正，壓線輪壓力氣動調節，標配四套沖壓模具，沖壓位置8軸雙向數控自動跟蹤，參數寫入微調。

Film Punching:

Film unwinding is equipped with various functions such as magnetic powder tension and

automatic correction, pressing line pressure pneumatic control, punching 8 axis

dual-directional numerical control auto tracking, parameter read-in minor adjustment etc. It is

also equipped with 4 sets punching moulds.

貼合部；

橫刀裁切由伺服電機驅動，裁切角度準確控制，相比傳統氣缸驅動，有噪音低，速度快，角度可控的優點。滾筒吸附連續式粘貼相比傳統間歇式粘貼具有貼合速度快，對薄膜要求低等優點，貼合滾筒由伺服電機單獨驅動，在機器運行的情況下可自由調節薄膜貼合位置。

Film Pasting:

Transverse cutting knife is driven by servo motor with high cutting angle precision control.

Compared with traditional cylinder driving .It has got the advantages of low noise, high speed

with the angle able to control etc. Roller absorption continuous pasting is in higher speed and

requires less towards film compared with traditional intermittent pasting way. The pasting

roller is separately driven by servo motor and can freely adjust the film pasting position when

machine is running.

薄膜放卷部；

氣脹軸裝膜使更換薄膜更快捷，光電糾偏解決了薄膜卷材分切不平整的問題，放卷糾偏精度±0.2mm，電磁張力控制系統讓薄膜放料張力恒定在理想的狀態使薄膜壓痕以及沖孔精度更高。

Film Unwinding:

It adopts air shaft to install the film enables it to faster replace the film. The photoelectric correction well solves the problem of cutting unevenness for the film coiled material. The precision of unwinding correction is ±0.2mm.The Electromagnetic tension control system keeps the film feeding tension in constant at ideal state which makes the film creasing and punching in higher precision.